Interior detailing

Most interior trim (dashboard, console, doors, etc.) consists of a combination of vinyl, plastic, rubber and leather, which can be cared for with many of the same products, so there is no need to get a product for each material. Some products are strictly meant for cleaning, some are just for protection and others have a combination of both. In general products strictly meant for cleaning or protection are more effective than options that do both. If you need a serious cleaning then we highly recommend picking up a separate cleaner and protectant.

Even if your vehicle is relatively clean we recommend at a minimum of 1 – 2 times per year you use just a cleaner on the interior for a more thorough cleaning. If your vehicle is well maintained than you may be able to use a cleaner and protectant in one bottle for maintenance cleanings. For the vinyl, plastic, rubber, carpets and mats our Interior Detailer is a great product. It’s a highly effective and very versatile formula that is very gentle. If you want some outstanding protection afterward our Trim ceramic coating is a great choice for rubber, leather, vinyl, plastic, etc. It leaves a nice dark finish that is not glossy or greasy while providing outstanding UV protection.

Caring for your fabrics is pretty simple, but unfortunately your carpets often see the most wear and tear since you are constantly bringing in dirt, debris and contamination from your shoes. First off remove your mats and be careful not to dump dirt and pebbles on the mat on to the carpets while removing them. A quick vacuum will help remove the obvious build ups if you haven’t cleaned the carpets and mats recently, but don’t get fussy you’ll vacuum them again later in this process.

A firm bristle brush is one of the most underrated tools in detailing and can be used next to loosen debris embedded in the carpets. Start brushing in a corner and work your way towards one mid point from all corners and sections. Once you’ve made a pile of debris, use a vacuum to remove it. Continue this same process for each fabric section and if you have fabric seats start with them and move on to the carpets and mats second. After making an initial pass with the brush and vacuum, spot treat any stains with a fabric cleaner.

Most cleaners should dwell on the fabric for 1 – 2 minutes, then scrub them again with a bristle brush in multiple different directions with medium pressure. The brushes bristles will get in between the carpet fibers and help bring contaminants to the surface. At the same time the bristles will break up stains and build ups on the surface. If stubborn stains persist spray them again with your cleaner and dip your brush in a tray of hot water before scrubbing them again with medium to firm pressure.

When you are satisfied with the cleaning, use the vacuum if needed to remove any visible debris. Once your carpet has completely dried, we recommend protecting your carpet. We use our FIBER Ceramic formula, this is a great example of a fabric protectant. This will help prevent stains from forming in the future and will make cleaning your fabrics easier in the long run. Simply mist some product onto your carpet, mats and upholstery for a barrier of protection and you are done. The carpets will continue to look and feel completely natural but they will resist moisture and stains.